Development Environment

LinuxNote List-page

Preparation materials

• Software
  
  
  
  
  • arm-toolchain-3.4.3.tar.gz
  
  
  • linux-2.6.24.4-w5300e01
    
    
    
    
    • included .config : copied w5300e01-config-v01
    
    
    • patched by patch-w5300e01-v01 : patch-w5300e01-v01
    
    
  
  


• Hardware
  
  
  
  
  • W5300E01-ARM Schematics
  
  
  • WIZ550io Pin Map
  
  


• Documentations
  
  
  
  
  • W5300E01-ARM Manual
  
  
  • WIZ550io
  
  

Install Toolchain

arm-toolchain-3.4.3.tar.gz을 다운받은 뒤 아래의 순서대로 설치한다. 경우에 따라서는 사용자 환경에 맞게 변경하여 설치한다.

1. make directory /usr/local/arm

[code lang=cpp]
mkdir /usr/local/arm
[/code]

1. Install toochain

[code lang=cpp]
# tar zxvf arm-toolchain-3.4.3.tar.gz
# cp -rf usr/ /usr/local/arm/arm-gcc-W5300
[/code]

1. Setting toochain path:

[code lang=cpp]
//Add below path in **.bashrc**
export PATH=/usr/local/arm/arm-gcc-W5300/bin::$PATH
//then sourcing the bashrc file
# source .bashrc
[/code]

1. Verify: type arm and press TAB
   
   

   ~$ arm
   arm2hpdl             arm-linux-gcc        arm-linux-objdump
   arm-linux-addr2line  arm-linux-gcc-3.4.3  arm-linux-ranlib
   arm-linux-ar         arm-linux-gccbug     arm-linux-readelf
   arm-linux-as         arm-linux-gcov       arm-linux-run
   arm-linux-c++        arm-linux-gdb        arm-linux-size
   arm-linux-c++filt    arm-linux-ld         arm-linux-strings
   arm-linux-cpp        arm-linux-nm         arm-linux-strip
   arm-linux-g++        arm-linux-objcopy    
   



2. Compile Linux kernel
   
   

   # tar zxvf linux-2.6.24.4-w5300e01.tar.gz
   # cd linux-2.6.24.4
   # cp ../w5300e01-config-v01 .config
   # make wizImage
   # or make ARCH=arm CROSS_COMPILE=arm-linux- wizImage -j8
   

NEXT: Note2 - Hardware Connections