2015년 3월 4일 수요일

How to connect mbed LPC114FN28 to AXEDA for Internet of Things?

This post shows how to connect mbed LPC114FN28 to AXEDA Service for Internet of Things.

mbed LPC1114FN28

mbed LPC1114FN28

>The mbed LPC1114FN28 operates at CPU frequencies of 48 MHz. The LPC1114FN28 includes up to 32 kB of flash memory, up to 4 kB of data memory, one Fastmode Plus I2C-bus interface, one RS-485/EIA-485 UART, one SPI interface with SSP features, four general purpose counter/timers, a 10-bit ADC, and up to 22 general purpose I/O pins.

http://developer.mbed.org/platforms/LPC1114FN28/
>Note: LPC1114FN28 platform doesn’t support RTOS due to its flash size. Please *do not import mbed-rtos library
into your project.

mbed LPC1114FN28 has very limited size memory size and no Internet connectivity.
In addition, LPC114EN28 doesn’t support RTOS and EthernetInterface.

How to connect mbed LPC114FN28 to AXEDA (IoT Cloud Platform)?
An answer is WIZ550io.

WIZ550io
WIZ550io is an auto configurable Ethernet controller that includes a W5500 (TCP/IP hardwired chip and PHY embedded), a transformer and RJ45. It supports Serial Peripheral Interface (SPI) bus as host interface. Therefore,
host system can be simply connect to Internet without EthernetInterface or TCP/IP software stack (included in RTOS).
http://developer.mbed.org/components/WIZ550io/

Hardware - mbed LPC1114FN28 + WIZ550io

mbed LPC1114FN28

  • WIZ550io: Ethernet Connectivity

    pin name LPC1114FN28 direction WIZ550io
    miso dp1 J1:3
    sck dp6 —-> J1:5
    scs dp26 —-> J1:6
    RSTn dp25 —-> J2:3
  • Potentiometer:

    pin name LPC1114FN28 direction Potentiometer
    AnalogIn dp13 <—- 2(OUT)
Software - AxedaGo-mbedNXP + W5500Interface
  1. Import AxedaGo-mbedNXP

  2. Change a platform as mbed LPC1114FN28

    • This program is made for LPC1768. But, we will use LPC1114FN28. So, LPC1114EN28 is selected the right platform in the compiler.
      mbed LPC1114FN28
  3. Delete EthernetInterface and mbed-rtos on AxedaGo-mbedNXP_WIZ550io

  4. Import W5500Interface

  5. Porting main.cc

    • For using WIZ550io, EthernetInterface Init. should be changed as below,
      #if defined(TARGET_LPC1114)
      SPI spi(dp2, dp1, dp6); // mosi, miso, sclk
      EthernetInterface eth(&spi, dp25, dp26); // spi, cs, reset
      AnalogIn pot1(dp13);
      #else
      EthernetInterface eth;
      AnalogIn pot1(p19);
      AnalogIn pot2(p20);
      #endif
      
    • AnalogIn ports should be also configured by depending on platform.
AXEDA
  • make dashboard on Axeda

    1. Click "AXEDA REDY"
      mbed LPC1114FN28

    2. Select mbed LPC1768 and enter device name
      mbed LPC1114FN28

    3. Copy serial number
      mbed LPC1114FN28

    4. input serial number in code(main.cc)

      char *SERIAL_NUM = "SerialNumber";
      
Enjoy AXEDA with LPC1114FN24 + WIZ550io

Before Enjoy Axeda, click the Compile button at the top of the page and download .bin on your platform.

  • Serial Terminal Log.
    You will comfirm DHCP IP address, Protentiometer value and sending message in debugging message.

      Connected to COM42.
    
      initializing Ethernet
       - Ethernet ready
      Ethernet.connecting 
       - connecting returned 0 
      Trying to get IP address..
        -  IP address:192.168.13.53    //&lt;---  DHCP IP address 
      Sending Value for well1 0.00     //&lt;--- Potentiometer value
      Received 36 chars from server:   //sending message
      HTTP/1.1 200 
      Content-Lengtved 36 chars from server:
      HTTP/1.1 200 
      Content-Length: 0
    
      Sending Value for well1 0.14     //&lt;--- Potentiometer value
      Received 36 chars from server:   //sending message
      HTTP/1.1 200 
      Content-Length: 0
    
      Sending Value for well1 0.27    
      Received 36 chars from server:
      HTTP/1.1 200 
      Content-Length: 0
    
      Sending Value for well1 0.29
      Received 36 chars from server:
      HTTP/1.1 200 
      Content-Length: 0
    
  • Axeda Developer Toolbox
    Your mbed board is now connected to your Axeda Toolbox account.
    Open up the mbed Widget by proceeding to your dashboard from the staging page.

mbed LPC1114FN28

In Data Items, it is able to displays to Potentiometer values from LPC1114FN24 + WIZ550io with graphic line.
mbed LPC1114FN28

Comparison of mbed LPC1768 and mbed LPC1114FN28 for Axeda
mbed LPC1768 (lwIP) mbed LPC1114FN28 (WIZ550io)
Codes  sw stack codes TOE codes
Memory usage sw memory usage sw memory usage

In casd of mbed LPC1768, the code size for Axeda is more than double the size of the Flash memory of the LPC1114 to 66.8kB. On the other hand, memory usage of LPC1114FN28 + WIZ550io is 65% (20.8kB).

Get Codes

http://developer.mbed.org/users/embeddist/code/AxedaGo-mbedNXP_WIZ550io/

댓글 없음:

댓글 쓰기